Safety Data Sheet

According to Regulations (EC) No 1907/2006 (REACH)

Download Data Sheet

Procuct Safety Data Sheet

For the complete SDS in PDF format, click the link above. 

Product Identification

Trade Name: MIRACLE COVER
Manufacturing Name: Ecosil
Hazardous Ingredients: OSHA-PEL-ACGH TLV-OTHER LIMIT; all ingredients that are not regulated by OSHA are considered trade secrets

Fire and Explosion Data

Flash Point (Method Used): None
Flammable Limits: None
Extinguishing Media: NON-COMBUSTIBLE
Special Fire Fighting Procedures: None
Unusual Fire and Explosion Hazards: None

Product Description

A. Water and Liquid Repellent – Miracle Cover is a one component white liquid with silicone rubber dispersion which, when applied according to specifications, seals porous surfaces making them resistant to penetration by water and other liquids with little or no change in color or appearance.
B. Extra Strength – Miracle Cover in extra strength “Miracle Cover Marine” and “Graffiti Guard” form fills voids in porous surfaces and minimizes the penetration and attachment of barnacles, moss, and oils from marine vessels as well as the penetration of graffiti. Thus allowing the removal of graffiti with an approved cleaner and low pressure water rinse without sacrificing the anti-graffiti barrier. High pressure washing may be used for removal but will reduce the life expectancy of Miracle Cover’s water repellence and anti-graffiti barrier.
C. Miracle Cover has material flexibility after curing which allows for expansion and contraction, building movement, and temperature extremes from -70° to +400° Fahrenheit.

Technical, Physical and Chemical Data

Typical Uncured Properties: Appearance and Odor : White liquid with very mild odor
Specific Gravity: (H O-1): 1.0 Solubility in Water: Soluble VOC less water than 25 grams per liter Vapor Pressure: (mm Hg): N/A Vapor Density: (Air – 1) +1 Percent Volatiles: None
Boiling Point : Degrees 212 Fahrenheit Evaporation Rate : (Butyl Acetate – 1) Melting Point : N/A PH : 7 – 8 Solids by Weight : Regular: 6 – 8%, Marine: 12 – 16%, Graffiti Guard: 30 – 32%
Typical Cured Properties:
Initial Cure: 1.5 hours Full Cure: 24 – 48 hours depending on substrate and weather conditions ASTM D412: Elongation 325%
ASTM E96: Water vapor transmission .017 grains/hour/foot cubed Permeability: .04 (Perm) UV Resistance: Excellent.

Reactive Data

Stability: Stable
Incompatibility (Materials to Avoid): None
Conditions to Avoid: Strong Oxidizers and Caustics
Hazardous Decomposition or Byproducts: None
Hazardous Polymerization: Will not occur

Fire and Explosion Data

Flash Point (Method Used): None
Flammable Limits: None
Extinguishing Media: NON-COMBUSTIBLE
Special Fire Fighting Procedures: None
Unusual Fire and Explosion Hazards: None

Emergency and First Aid Procedures

Eyes: Flush with water
Skin: Wash with soap and water
Ingestion: DO NOT INDUCE VOMITING, GET MEDICAL ATTENTION

Health Hazard Data

Routes of Entry : Inhalation, Skin, and Ingestion all: Yes
Health Hazards (Acute and Chronic): Carcinogenicity: No
Unrelated NTP: No
IARC: No
OSHA Regulated: No
Signs and Symptoms of Exposure: EYE and SKIN irritation
Medical Conditions Generally Aggravated by Exposure: EYE and SKIN irritation

Protection and Control Measures

  • Respiratory Protection: None required
  • Ventilation: None
  • Protective Gloves: Any rubber glove
  • Eye Protection: Chemical splash goggles or safety glasses
  • Clothing or equipment
    Work/Hygienic Practices: Keep body contact and splash to a minimum; Use in a ventilated area unless recommended respiratory protection is used.

Spills and Disposal Procedures

Steps to be taken in case the material is released or spilled: Use sponges or mops to put liquid in container. Allow water to evaporate from the container. Solids are non-toxic. Clean all equipment with soap and water. If product has cured clean with mineral spirits or paint thinner.
Waste Disposal: Dispose solids in usual trash.
Precautions to be taken in handling and storage: Avoid freezing and temperatures over 100  Fahrenheit

(619) 448-6386

Book a Cleaning or Customize a Plan Today

Address

Raymond Board
R & R Associates
9640-B Mission Gorge Rd, #166
Santee, CA 92071

5 + 11 =